Introduction
1-20 Installation Checklist
❐ Install the Client software. See “Installing BCMS Vu Client Software” on
page 4-16. Reboot unless you are going to install Wallboard software on
the Client PC.
❐ If a wallboard is connected to this Client PC and BCMSVu Server
software is not installed on this PC, install the Wallboard software. See
“Installing BCMS Vu Wallboard Software” on page 4-30. Reboot your
PC.
❐ Start the Client software. See “Starting BCMS Vu Client Software” in
Chapter 3 of BCMS Vu Software R2 User Guide.
❐ Configure the Client. See “Configuring Thresholds and Maximum
Values,” “Activating Alerts,” and “Color Palette Configuration” in
Chapter 4 of BCMS Vu Software R2 User Guide.
❐ If you have one or more wallboards connected to this PC start the
wallboard software. Refer to “Starting Wallboard Software,” page 3-14
in BCMS Vu Software R2 User Guide.
On a Wallboard PC without Client Software Installed 1
❐ Install Wallboard software. Refer to “Installing BCMS Vu Wallboard
Software” on page 4-30.
❐ Start the Wallboard software. Refer to “Starting Wallboard Software,”
page 3-14 in BCMS Vu Software R2 User Guide.
Acceptance 1
❐ Verify that the acceptance criteria on page 1-21 have been met.
Comments to this Manuals