Avaya R2 Installation Guide download pdf (Page 29)

Introduction

1-12 Upgrading from BCMS Vu R1 to BCMS Vu R2

Upgrading from

BCMS Vu

R1 to

BCMS Vu

R2 1

Upgrading from R1 on

Windows

NT 4.0 to R2

Server

We recommend that when you upgrade from BCMSVu R1 on Windows NT

4.0 to BCMSVu R2 Server, you do not remove BCMSVu R1, because you

thereby preserves historical data, saved reports, and certain configuration

parameters. We also recommend that you install the R2 Server software on

the R1 PC where the historical database is located, although this is not

required.

Note

When you upgrade from R1 to an R2 Server,

• The R2 Server PC must be a Pentium.

• The R2 Server PC must have at least 64 MB of RAM.

• Historical data is copied to the R2 Server under the

default Server name. For example, if you are installing

the Server on the C: drive, historical data is copied to

C:\Program Files\Lucent\BCMS Vu\Server\BCMSVu

Server.

• Configuration information BCMS data, Server connec-

tion, and configuration information is unchanged.

• Saved reports remain where they were before the

upgrade. R2 Client software can open these reports.

• Wallboard configuration is not saved. You must re-

administer it.

Note

After you upgrade the R2 software and verify that it

functions properly, you should remove the R1 software:

1. In Control Panel, select Add/Remove Programs.

2. Highlight “BCMSVu 1.0”.

3. Select Add/Remove.

4. Return to Add/Remove Programs.

5. Highlight Data Access Objects (DAO) 3.0”.

6. Select Add/Remove.

7. Exit Add/Remove Programs and Control Panel.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 146 147

No comments

Avaya R2 Installation Guide Page 29