Avaya BayStack AN and ANH Routers User Manual download pdf (Page 63)

Installing the BayStack 8-Port ANH

114113-B Rev. 00

2-5

Supplying Equipment

You may need items that are not included in the ANH accessory package. Before

installing the ANH hardware, ensure that you have all the cables, tools, and other

equipment you need.

Cables

Unless you specifically ordered them, the Ethernet and synchronous cables

required for your network configuration are not included in the ANH accessory

package. If you do not have the proper cables, contact your network administrator

or see the Cable Guide.

Management Console

You can attach an optional VT-100 console (or equivalent) to the ANH to monitor

the results of startup diagnostics and perform manual boot configurations, or you

can attach any AT compatible modem to allow remote dial-in access to diagnostics

and configuration.

Mounting Hardware

To mount the 8-port ANH in an equipment rack, you need a Phillips screwdriver

and a rack that meets the following specifications:

• Heavy-duty steel construction

• Electronic Industries Association (EIA) standard hole-spacing

• Width of 19 in. (48.26 cm) and depth of 24 in. (60.96 cm)

If the rack does not have threaded rail holes, you must supply cagenuts to use with

the cagenut screws (Figure 2-2)

Note:

To use the Netboot, Directed Netboot, or Local Boot configuration

options (see Chapter 3), connect a console the first time you turn on the ANH.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 183 184

No comments

Avaya BayStack AN and ANH Routers User Manual Page 63