Avaya BCM50 Installation Manual download pdf (Page 134)

134 Chapter 13 Using Telset Administration to set the basic parameters

NN40020-302

To select the region

Set the Region using Feature **PROFILE from a two-line display telephone.

For information about using Telset Administration to set this parameter, see the Telset

Administration Guide.

To select the telephony startup template and start DN

Set the Template and Start DN using Feature **STARTUP from a two-line display telephone.

For information about using Telset Administration to set this parameter, see the Telset

Administration Guide.

Configure other telephony startup parameters using Feature **CONFIG. For more information,

see the Telset Administration Guide.

To initialize voice mail

Initialize your voice-mail system using Feature 983 from a two-line display telephone.

For information about using Telset Administration to initialize your voice mail system, see the

CallPilot Telephone Administration Guide.

To create Telset user accounts

1 Select Feature 9*8 from a two-line display telephone.

2 Enter the following user ID and password:

User ID: SETNNA

Password: CONFIG

The numerical values of the user ID and password are 738662 and 266344, respectively.

3 Press NEXT to scroll through the menu and select User Accounts.

4 Press OK. The Accounts screen appears.

5 Press CHNGE to create an account.

6 Press NEXT to scroll through the list of available accounts to create.

7 Press CRT to create the account.

If you see the DEL command instead of the CRT command, then the account already exists.

Note: This is available for only 15 minutes after the system starts.

Note: You can create Telset accounts using only Telset Administration. To

create Element Manager accounts, you must use Element Manager.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 334 335

No comments

Avaya BCM50 Installation Manual Page 134