Chapter 14 Using Element Manager to set the basic parameters 139
Installation and Maintenance Guide
To connect to the BCM50 system using Element Manager
1 Open Element Manager.
2 From the Network menu, select New Network Element, and then select Business
Communications Manager.
3 Enter the BCM50 system IP address in the dialog box (default is 10.10.10.1).
4 Click OK.
5 From the Network Elements folder, select the BCM50 system IP address.
6 Enter the following user name and password:
User name: nnadmin
Password: PlsChgMe!
7 Click Connect.
You are now connected to the BCM50 system.
Configuring the initial parameters
Use the following procedures to configure the initial parameters for the BCM50 system using
BCM50 Element Manager:
• To enter a keycode on page 139
• To configure the LAN IP address on page 140
• To configure the modem on page 140
• To configure the startup template for telephony services on page 140
• To initialize voice mail on page 141
To enter a keycode
1 From the Configuration tab, click the System folder to expand it.
2 Select Keycodes.
The Keycodes panel appears.
3 Click Load File.
The Open dialog box appears.
4 Select the keycode file for your system, and then click Open.
For details about generating and entering the keycodes for your system, see the Keycode
Installation Guide.
Comments to this Manuals