Troubleshooting Network Boot Problems
117341-A Rev. A B-7
Use the set command to correct settings, if necessary. For example, if the
router has a token ring port and the
wfDrivers.wfTMS380Load.0
setting is not
2147483648, enter the following command to correct it:
set wfDrivers.wfTMS380Load.0 2147483648;commit
• If the router is netbooting with a synchronous interface, enter the
following command to display information about the interface, where
<connector> is the interface connector number:
get wfSyncEntry.*.1.
<connector>
Ensure that external clocking is set.
• If the router is netbooting with an Ethernet interface, enter the following
command to display information about the interface, where <connector>
is the interface connector number:
get wfCSMACDEntry.*.1.
<connector>
• If the router is netbooting with a token ring interface, enter the following
command to display information about the interface, where <connector>
is the interface connector number:
get wfTokenRingEntry.*.1.
<connector>
Comments to this Manuals