Avaya R7 User Manual download pdf (Page 16)

DEFINITY® Enterprise Communications Server Release 7

Console Operations Quick Reference

555-230-890

Issue 3

June 1999

Console Operations

12Basic Operation

To make calls not using the selector console, perform the following:

1. Press the

START button or an idle call appearance button.

■ You hear a dial tone.

■ The call appearance lamp goes on.

■ The Position Available lamp goes off.

2. Dial the extension.

■ You hear a ringback tone.

■ The display shows the dialed number.

■ The ringback tone stops when the called party answers.

3. To end the call, press the

RELEASE button.

■ You are disconnected from the call.

■ The call appearance lamp goes off.

■ The display goes blank.

■ The Position Available lamp goes on.

■ The console returns to the normal operating mode.

NOTE:

Before the call completes, you can press the CANCEL or RELEASE

button to end the call attempt. If you press

CANCEL, you get another

dial tone. If you press

RELEASE, the console returns to the normal

operating mode.

Making a call to an outside number requires an outgoing trunk. You can access an

outgoing trunk in two ways:

■ You can make a call to an outside number by dialing a code for the

Automatic Route Selection feature or a specific trunk group, or

■ You can make a call to an outside number by pressing the trunk group

select button for the desired trunk.

NOTE:

Trunk group select buttons are not available at some locations. If the

trunk group select buttons are not administered, dial the trunk access

codes using the dial keypad.

230890_3.bk Page 12 Tuesday, April 20, 1999 12:57 PM

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

No comments

Avaya R7 User Manual Page 16