Avaya BayRS Version 15.1.0.0 Notice download pdf (Page 15)

Release Notes for BayRS Version 15.1.0.0

308663-15.1 Rev 00

DVMRP timers must be the same throughout the network. Therefore, if your

DVMRP network changes—for example, if you add a DVMRP router running

Version 15.1.0.0 to the network, or if you create a Version 15.1.0.0 configuration

file that contains DVMRP— make sure that the values for the timer parameters

match the ones already configured for the network as a whole.

Upgrading FireWall-1 Configurations

To upgrade FireWall-1* from a BayRS version earlier than 13.20, complete the

following steps.

Familiarize yourself with the Bay Command Console (BCC*).

Starting with BayRS Version 13.20, FireWall-1 no longer supports Site

Manager as a configuration tool. You must use the BCC to manage and

configure FireWall-1. For basic information about using the BCC, see Using

the Bay Command Console (BCC).

Make sure that you will not lose access to your router.

When you upgrade to BayRS Version 15.1.0.0, once you boot your router, the

Version 15.1.0.0 software invokes the default FireWall-1 security policy. This

default security policy drops all attempts at communication with the router.

If you manage a router at a remote location, you will no longer be able to gain

access to the router through the WAN connection. Before you upgrade, make

sure that you can gain access to the router by dialing in through the console

port, or that there is someone at the remote location who can configure the

router.

Reboot the router with BayRS Version 15.1.0.0, using an existing

configuration file.

Note:

If you are currently running Firewall-1 from BayRS Version 13.20 or

higher and want to upgrade to BayRS Version 15.1.0.0, you do not have to

follow these steps. Firewall-1 is not supported on the Passport* 2430 and

Passport 5430 platforms.

1 ... 14 15 16 ... 72

No comments

Avaya BayRS Version 15.1.0.0 Notice Page 15