Avaya BayRS Version 15.1.0.0 Notice download pdf (Page 41)

Release Notes for BayRS Version 15.1.0.0

308663-15.1 Rev 00

Protocols/Configurations Not Supported by Bidirectional NAT

• OSPF

• BGP

• IPsec on the same interfaces configured for bidirectional NAT

• BayRS ECMP

OSPF Guidelines

If you are using Open Shortest Path First (OSPF) services, please keep the

following guidelines in mind:

• As of BayRS Version 14.00, we do not support the OSPF backup soloist

feature.

• According to RFC 2328, the cost of an OSPF route to an aggregated group of

networks should be the distance to the furthest network in the group. A new

MIB parameter, wfOspfAggrUseMaxCost, allows you to determine how to

summarize the subnets using the area range. To use the furthest cost in the

routing table, set this MIB to 1 (Enable). If you accept the default, 2 (Disable),

the OSPF route cost is represented as the shortest path to a network within the

aggregated group of networks.

• When OSPF is configured on a synchronous PPP interface using Site

Manager, the interface type is set to Point-to-point rather than to the actual

default, Broadcast.

Traffic Filters Guidelines

Follow these guidelines when configuring traffic filters:

• If you apply a traffic filter to a multinetted interface (that is, an interface with

more than one IP address), the traffic filter might not work correctly. To

ensure that the filter works correctly, you must assign the same filter to all of

the IP addresses on the interface.

• Site Manager cannot understand traffic filters that you configured using the

BCC.

1 ... 40 41 42 ... 72

No comments

Avaya BayRS Version 15.1.0.0 Notice Page 41