Release Notes for BayRS Version 15.1.0.0
308663-15.1 Rev 00
39
• Using the BCC to delete an ATM interface or a service record with more than
570 PVCs can cause a watchdog timeout on the router. To prevent this from
occurring on configurations with more than 570 PVCs, use Site Manager to
delete the interface, or use the BCC to delete the PVCs before you delete the
ATM interface.
• If there is a loss of signal to a router during a period of heavy traffic, the ATM
interface on the router might stop functioning. If the ATM interface stops
functioning, you must reboot the router to recover.
• The following three MIB attributes: wfAtmizerVclRxOctets,
wfAtmizerVclTxOctets, and wfAtmizerVclTxClipFrames. Ignore the values
that these statistics return.
• On the ARE, BayRS does not release virtual channel connections when they
time out. To maintain the availability of VCCs for new activities, configure a
LAN emulation client (LEC) other than the router to release the inactive
VCCs.
• Setting ATM signal ports on a Switch and Router Conflict
• If you are using a switch with ATM signal ports set to V3.1, be sure to set the
signaling setting on the router to V3.1 to prevent a conflict between the two
devices. If you accept the default setting of V3.0 for the router, the router
faults repeatedly until you change the setting to V3.1.
APPN
The value configured for the Advanced Peer-to-Peer Networking (APPN) TG
Number parameter in Site Manager is not being used; the TG number on a link
station is being auto-negotiated.
BCC
If a context is deleted and re-created in the same BCC source file, unexpected
results may occur. The create/delete MIB is set to deleted when issuing the
deletion, but it is not reset to created when re-configuring the context.
Deleting a Hybrid Mode Permanent Virtual Circuit (PVC)
If you configure SRB on a router, do not delete hybrid mode PVCs. Otherwise, all
slots will restart.
Comments to this Manuals