Avaya BayRS Version 15.1.0.0 Notice download pdf (Page 58)

Release Notes for BayRS Version 15.1.0.0

308663-15.1 Rev 00

RIP Export Filters

Setting the From Protocols parameter for a RIP export filter to any value other

than the “Any” option causes the filter to fail. Consequently, the RIP export route

filter does not work if you specify any of the following options: RIP, EGP, OSPF,

Direct, Static, or BGP-3. To avoid this problem, be sure to use the “Any” option

when configuring all RIP export filters.

show ip routes

Displays Partial Information in the Technician Interface

For a router configuration encompassing IP equal cost routes, the

show ip routes

command in Technician Interface displays partial information only.

When using the Technician Interface, you must use the following command to

retrieve all equal-cost routes and show the complete routing table information:

ip routes -A

Sync

If the cable is removed from any synchronous port except octal sync on a BN, the

router gives no indication of the problem and the link remains active. The

configured WAN protocol closes all connections when the synchronous line driver

detects connection signal lost. To prevent this problem, enable the Sync Polling

parameter (Configuration Manager -> Edit Line -> Edit Sync Parameters).

SYSLOG

The status of syslog changes to down when you set the slot-lower-bound and

slot-upper-bound parameters to the same value (same slot) on a BN router

platform. Both syslog and filter logging terminate operation. However, the

following workaround is available. Do not set the slot-lower-bound and

slot-upper-bound parameters to the same value.

TFTP

If you try to use the Router File Manager to TFTP a file to the router from a

Windows directory that includes long names and spaces, the transfer fails. To

prevent this problem, move the file you want to send to a directory with a simple

name of no more than 15 bytes and no space characters.

1 ... 57 58 59 ... 72

No comments

Avaya BayRS Version 15.1.0.0 Notice Page 58