Avaya BayRS Version 15.1.0.0 Notice download pdf (Page 17)

Release Notes for BayRS Version 15.1.0.0

308663-15.1 Rev 00

For example, suppose you want to use FireWall-1 on 40 circuits. The first five

circuits share one security policy; the next 35 share a different security policy.

Using the BCC, assign policy index 1 to the first five circuits and policy index

2 to the next 35 circuits. You then have a total of 40 firewall circuits on the

router, with two policy index values and two security policies.

The Check Point log viewer treats circuits that share a policy index as one

circuit.

If you are running FireWall-1 on more than 32 circuits and you therefore need

to set the policy index value, use the BCC to navigate to the firewall prompt,

as described in step 4. Then enter:

policy-index

<value>

value

is the index value, from 1 to 1023.

For example, the following command sets the policy index to 1:

firewall/2.2.2.2#

policy-index 1

firewall/2.2.2.2#

Save the configuration file and reboot the router.

Reinstall the security policy.

Since you previously defined a security policy (using the earlier version of

BaySecure FireWall-1), you do not need to define it again. However, you must

reinstall it in on the router. For complete instructions on how to install the

security policy, see your Check Point FireWall-1 documentation.

If you want to install different security policies for different policy indexes,

use the Check Point FireWall-1 command line interface to enter the following

command:

fw load ../conf/<config_file> pol<policy_index_number>@<router_name>

Note:

If you do not use policy index values and you configure more than 32

circuits on the router, all IP forwarding is disabled on circuits after the 32nd. If

you use policy index values, but configure more than 32 policy index

groupings, all circuits assigned policy indexes after the 32nd will have all IP

forwarding disabled. The router logs warning messages that can help you

determine whether you have any circuits on which all IP forwarding is

disabled.

1 ... 16 17 18 ... 72

No comments

Avaya BayRS Version 15.1.0.0 Notice Page 17