Configuring DLSw Services
5-8
Parameter: Max Slot Sessions
Default: 200 (sessions per slot)
Range: 1 to 10000
Function: Specifies the maximum number of LLC2 sessions that a given slot in the
router can support for DLSw requirements. Specifying more sessions per
slot has the effect of dedicating more memory and processing resources to
DLSw interfaces running on the router.
Instructions: If possible, estimate the maximum number of LLC2 sessions that each
DLSw peer slot may need to support concurrently. Type a number that
• Meets session support requirements for DLSw services provided on
any slot of the router
• Allows a balance between the number of sessions supported for
DLSw services on a slot and the amount of resources remaining for
other protocols configured on the same slot
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.1.8
Parameter: Virtual Ring MTU
Default: 1500 (bytes)
Options: Any number of bytes equal to or greater than 1
Function: Specifies a Maximum Transmission Unit (MTU) size for frames sent
from local, LAN-attached systems to systems on remote LANs. The
smallest MTU size supported among all remote LANs in your
configuration determines the maximum value of the Virtual Ring MTU
parameter for the local router.
Instructions: Type in any number of bytes equal to or greater than 1.
Entering a new value or accepting the default value for this mandatory
parameter helps to prepare endstations for the MTUs of remote LANs.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.1.10
Comments to this Manuals