Avaya Configuring DLSw Services User Manual download pdf (Page 173)

Using DLSw Prioritization

6-19

The Peer Queue Conﬁguration window reappears (Figure 6-13). This time

two of the DLSw peers use peer-speciﬁc queues and two use the default queue

conﬁguration.

Figure 6-13. Peer Queue Conﬁguration Window with Both Default and

Peer-Speciﬁc Conﬁgurations

Enabling or Disabling a Single Peer’s Priority Queues

You can enable or disable the queues you conﬁgured for an individual DLSw peer

using the Peer Queue window.

1. From the Conﬁguration Manager window, select

Protocols➔DLSw➔Prot Prioritization (Outbound)➔Peer Queue Entries

(refer to Figure 6-8).

The Peer Queue Conﬁguration window appears (see Figure 6-13).

2. Select the peer from the scroll box.

Note: Once you enable priority queues using the Peer Queue Conﬁguration

window, you must use that window to disable that peer’s queues. You cannot

disable queues that are already active from the Global DLSw PP

Parameters/Default window.

1 ... 172 173 174 ... 204

No comments

Avaya Configuring DLSw Services User Manual Page 173