Avaya Configuring DLSw Services User Manual Page 96

  • Download
  • Add to my manuals
  • Print
  • Page
    / 204
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 95
Configuring DLSw Services
4-22
Parameter: Source (Virtual) SAP (hex)
Default: 0x4
Range: 0x01 to 0xFE
Function: Specifies the source service access point (SAP) of an emulated Token
Ring or Ethernet endstation for this device.
Instructions: Begin the address with 0x and enter a 1-digit or 2-digit hexadecimal
source SAP address associated with this device. Typical values are
multiples of 4.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.12.1.7
Parameter: Destination (Host) MAC (hex)
Default: None
Options: Any standard MSB Token Ring MAC address
Function: Identifies (with the Destination SAP) the Token Ring or Ethernet host the
local device will reach via SDLC services.
Instructions: Consult your host system manager for the host MAC address; then enter
the 12-digit hexadecimal address.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.12.1.8
Parameter: Destination (Host) SAP (hex)
Default: 0x4
Range: 0x01 to 0xFE
Function: Identifies (with the Destination MAC) the Token Ring or Ethernet host the
local device will reach via SDLC services.
Instructions: Consult your host system manager for the host SAP address. Enter the 0x
prefix followed by a 1-digit or 2-digit hexadecimal address.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.12.1.9
Page view 95
1 ... 95 96 97 ... 204

Comments to this Manuals

No comments