Configuring DLSw Services
5-48
Parameter: PU Type
Default: None
Options: T2.0 | T2.1
Function: Specifies the type of the XID-sending node. This parameter is used with
the IDBLOCK, IDNUM, and XID Format parameters to determine the
station exchange identification (XID) value.
Instructions: Choose either T2.0 or T2.1.
MIB Object ID: N/A
Parameter: IDBLOCK
Default: None
Options: 017 | 061 | any other 3-digit hexadecimal value
Function: Specifies the block number, which must match the host’s IDBLOCK
parameter value that identifies incoming connection requests. This
parameter is used with the PU Type, IDNUM, and XID Format
parameters to determine the station exchange identification (XID) value.
Instructions: Obtain the configured value at the host (from VTAM or other host
operating system) for this device. In most cases:
— Type 017 for a 3174 in T2.0 mode.
— Type 061 for a T2.0 node in fixed format.
MIB Object ID: N/A
Comments to this Manuals