Configuring RSVP
117355-C Rev 00
7-7
Configuring RSVP on an Interface
When you add RSVP to an IP interface, RSVP is configured on the interface with
default values for all interface parameters. You customize RSVP on the interface
by setting interface parameters as described under the following topics:
Disabling and Reenabling RSVP on an Interface
By default, RSVP is enabled on every interface on which it is configured. You can
use Site Manager to change the state of RSVP on an interface as required.
Topic Page
Disabling and Reenabling RSVP on an Interface
7-7
Setting the RSVP Default Refresh Timer 7-8
Setting the RSVP Default Lifetime Multiplier 7-9
Setting the RSVP Refresh Blockade Multiplier 7-10
Setting the TTL Override 7-11
Setting the Route Delay Value 7-12
Enabling and Disabling UDP Encapsulation 7-13
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
RSVP
. The RSVP menu opens.
4. Choose
Circuit
. The Edit RSVP Circuit Parameters
window opens.
5. Set the
Enable
parameter. Click on
Help
or see the parameter description on page
A-38.
6. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Comments to this Manuals