Avaya BayRS Version 15.2.0.0 User Manual download pdf (Page 15)

Configuring ATM Services

314470-15.2 Rev 00

1-3

For example, the following command changes the clear alarm threshold from 2 to

8 seconds:

atm-e3/1/1/2/1#

clear-alarm-threshold 8

atm-e3/1/1/2/1#

Specifying the Line Coding Method

To specify the line coding method, navigate to the ATM interface prompt (for

example,

box

;

atm/1/1/2/1

;

atm-e3

) and enter:

line-coding {hdb3

b3zs}

The default for the ATM E3 interface is hdb3 and the default value for the ATM

T3 interface is b3zs.

Specifying the Line Type

To specify the line type for this interface, navigate to the ATM interface prompt

(for example,

box

;

atm/1/1/2/1

;

atm-e3

) and enter:

line-type <type>

type

is autodetect, ds3m23, or ds3cbitparity for the ATM T3 interface and

e3framed or e3plcp for the ATM E3 interface.

If the line type is ds3m23, the framing mode should be m23 or t3m23plcp.

If the line type is ds3cbitparity, the framing mode should be cbit or t3cbitplcp.

If the line type is either e3framed or e3plcp, the framing mode should be either

g751or g832.

For instructions on setting the framing-mode parameter, see Configuring ATM

Services.

Specifying the Loopback Mode

To force the interface into loopback mode so that the far-end or intermediate

equipment can perform diagnostics on the network between that equipment and

the T3/E3 interface, navigate to the ATM interface prompt (for example,

box

;

atm/1/1/2/1

;

atm-e3

) and enter:

loopback-mode <type>

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 53 54

Comments to this Manuals

No comments

Avaya BayRS Version 15.2.0.0 User Manual Page 15

Comments to this Manuals

Related products and manuals for Software Avaya BayRS Version 15.2.0.0