Avaya BayRS Version 15.2.0.0 User Manual download pdf (Page 42)

BayRS Version 15.2.0.0 Document Change Notice

A-2

314470-15.2 Rev 00

You can also use the Technician Interface to modify parameters by issuing set and

commit commands with the MIB object ID. This process is the same as

modifying parameters using Site Manager. For information about using the

Technician Interface to access the MIB, refer to Using Technician Interface

Software.

ATM Port Parameters

You use the following parameters to configure the ATM T3/E3 interface on the

Passport 5430.

Caution:

The Technician Interface does not verify that the value you enter for

a parameter is valid. Entering an invalid value can corrupt your configuration.

Parameter: Enable/Disable

Path: Configuration Manager > ATM1 > Physical Layer Configuration > DS3 or E3

Default: Enable

Options: Enable

Disable

Function: Enables or disables this interface.

Instructions: Set to Disable only if you want to disable the interface.

MIB Object ID: 1.3.6.1.4.1.18.3.4.26.10.1.2

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 53 54

No comments

Avaya BayRS Version 15.2.0.0 User Manual Page 42