Avaya BayRS Version 15.2.0.0 User Manual download pdf (Page 46)

BayRS Version 15.2.0.0 Document Change Notice

A-6

314470-15.2 Rev 00

Parameter: Data Path Enable

Path: Configuration Manager > ATM1 > ATM Line Attributes

Default: Enable

Options: Enable

Disable

Function: Specifies whether the router disables the interface between the driver and the

higher-level software (the data path interface) when you disconnect the cable

from the ATM module.

If you select Enable, then when you disconnect the cable from the ATM module,

the router disables the data path interface after the time you specify with the

Data Path Notify Timeout parameter.

If you select Disable, the router does not disable the data path interface when

you disconnect the cable from the ATM module.

Instructions: Select Enable or Disable. If you select Enable, be sure to enter an appropriate

value for the Data Path Notify Timeout parameter.

MIB Object ID: 1.3.6.1.4.1.18.3.4.23.3.2.1.11

Parameter: Data Path Notify Timeout

Path: Configuration Manager > ATM1 > ATM Line Attributes

Default: 1

Options: 0 to 3600

Function: Specifies the time (in seconds) that the router waits before disabling the data

path interface when you disconnect the cable from the ATM module, providing

that you set the Data Path Enable parameter to Enable.

Instructions: Accept the default or enter an appropriate value.

MIB Object ID: 1.3.6.1.4.1.18.3.4.23.3.2.1.12

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 52 53 54

No comments

Avaya BayRS Version 15.2.0.0 User Manual Page 46