Avaya IP Telephony Configuration Guide download pdf (Page 22)

22 Using telephone features

P0609328 01

Setting up your telephone

These codes allow you to adjust features on your telephone, if they are available in your system

and are not restricted at the telephone or line. Refer to “Answer DN answer restrictions” on page

14 and “Telephone model feature access constraints” on page 15.

External call features that can be programmed into memory button codes:

Adding external

call features to a

dial sequence

1. Enter FEATURE *3

2. Enter auto dial or speed dial feature code.

3. Enter call feature in appropriate place in dialing string.

Link

FEATURE 71: Generate a Link signal to access a PBX or other host exchange.

Note: This feature must be enabled under the restrictions for the telephone.

Long Tones

FEATURE 808: Generate a tone for as long as you hold down a button.

This is used to communicate with devices like fax or answering machines.

Long tones are in effect only for your current call.

Pause

FEATURE 78: Program within an external auto dial sequence to insert a 1.5-second

delay.

Wait for dial tone

FEATURE 804: Program with an external auto dial number to cause the system to

wait to receive dial tone from another system before proceeding with the dialing

sequence.

Background

Music

Listen to music (provided by your office) through your telephone speaker when you

are not on a call.

• Press FEATURE 86 to activate.

• Press FEATURE #86 to cancel

Programming note: This feature must be enabled under Feature settings. A source

must also be available. Either as a hardware connection to the Business

Communications Manager or as an IP music file (.wav or .au), configured through the

IP Music feature.

Blocking programming: You can block the user from changing the background

music assignment by setting the restrictions for the telephone to complete restriction.

Contrast

adjustment

Adjust the contrast of your display.

1. Press FEATURE *7.

2. Press a number from 1 to 9 (depending on your telephone).

3. Press HOLD to set your choice.

Programming note: A default contrast setting is set through system programming,

under User Preferences for each telephone.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 83 84

Comments to this Manuals

No comments

Avaya IP Telephony Configuration Guide Page 22

Comments to this Manuals

Related products and manuals for Telephones Avaya IP Telephony