Avaya IP Telephony Configuration Guide download pdf (Page 42)

42 Using telephone features

P0609328 01

Call display services

The following features are available only if you subscribe to Call Display services from your local

telephone company. Your telephone must have a one or two-line display to view these features.

Programming note: Restriction services can be disabled or set to start manually or

automatically under Services Schedules (Restriction service). Lines and telephone

programming determine which restrictions are active during a given schedule.

Routing

services

From a control telephone, turn on one of six services for routing on particular lines or

telephones from a designated control telephone. You will be required to enter a password.

1. Enter FEATURE 873.

2. Enter the Service Control password.

3. Use NEXT to scroll to the schedule you want to active. On one-line display telephones,

press #.

4. Press OK to select the schedule.

5. Press QUIT to exit. (On one-line display telephones, press RLS).

Cancel feature: FEATURE #873

Programming note: Routing services can be disabled or be set to start manually or

automatically under Services Schedules (Restriction service). You can also indicate

whether calls that go unanswered will overflow to the line pool specified in the Normal

schedule for the route. Routing is configured under Call routing.

Alpha tagging

(passive CLID)

No user input.

If this feature is active on the system and the telephones are programmed to receive it,

incoming CLID displays on those telephones that have the assigned the relevant lines

and support programming.

Programming note: When a call comes in on a target line or an analog line that

supports number-only CLID, and the CLID match length (General settings,

Feature settings) is greater than 0 (zero), the system matches the incoming number

with the system speed dialing list. If the number matches the amount of digits

indicated in CLID match length, the name entered for the system speed dial code

displays on the receiving telephone, providing that telephone has CLID display

allowed (Line assignment, Caller ID set) for that line, and it is configured to display

name first (Telco features for each telephone record).

CLID limitation: Due to system resources, any assigned CLID lines can only support

a maximum of 30 call-display-enabled telephones.

Auto bumping

(call logs)

Have the system automatically delete the oldest log item from a full Call Log, so that a

new log item can be stored.

Activate feature: FEATURE 815 Cancel feature: FEATURE #815

Note: If telephones allow logging, ensure that this option is activated. If this feature is

not active and the log file fills, subsequent calls will not be logged.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 83 84

Comments to this Manuals

No comments

Avaya IP Telephony Configuration Guide Page 42

Comments to this Manuals

Related products and manuals for Telephones Avaya IP Telephony