Avaya Business Communications Manager 5.0 - Configuration - System User Manual download pdf (Page 221)

Market profile attributes reference 221

Nortel Business Communications Manager 5.0

Configuration — System

NN40170-501 02.04 Standard

September 2009

In the Business Element Manager, go to Administration> Utilities >

Reboot.

7 Click Reboot.

8 The system undergoes a warm reset and the profile is activated.

--End--

Removing a profile

The set-based administration interface to the analog profile status can be

used to access the profile file status and to optionally remove the profile.

Administration telset interfaces are accessible only by a user with an Installer

level of telset user privileges. Use the set-based administration interface to

access the programmable analog interface status, and optionally remove the

current analog profile file if it is determined that the installed analog profile file

is inappropriate for your installation.

The profile should only be removed under guidance from Nortel Support (1-

800-4Nortel).

Procedure steps

Step Action

1 Call 1-800-4Nortel (1-800-466-7835) to reach an authorized Nortel

technician.

2 In the handset interface, press ** Option.

3 Log in by following the voice prompts or the display button options.

4 Enter your password and press OK.

5 Press Next to continue through the screens until you reach the Profile File

screen.

The Profile File screen appears. The Profile status is Y if a profile file exists.

If the Profile status is N, then no profile file exists on the BCM system and

no further action is required.

6 Press DEL.

The file is removed, and the Profile File status changes to N.

7 To remove the parameters from the interface, perform a warm restart of the

BCM system.

--End--

1 2 ... 216 217 218 219 220 221 222 223 224

No comments

Avaya Business Communications Manager 5.0 - Configuration - System User Manual Page 221