Avaya Business Communications Manager 5.0 - Configuration - System User Manual download pdf (Page 57)

BCM 5.0 configuration with Business Element Manager 57

Nortel Business Communications Manager 5.0

Configuration — System

NN40170-501 02.04 Standard

September 2009

6 Repeat step 3 to step 5 to add another manager IP address.

--End--

Deleting an SNMP manager

You can delete an SNMP manager if it is no longer required.

Procedure steps

Step Action

1 Select Configuration > Administrator Access > SNMP.

2 Select the General tab.

It is normally selected by default.

3 In the SNMP Manager List area, select a manager in the IP Manager IP

address table.

Click Delete.

A confirmation message appears.

4 Click Yes to confirm the deletion.

--End--

Configuring SNMP community strings

Configure SNMP community settings to add a community string and specify

the type of access. An SNMP community string is a value, similar to a user ID

or a password, that allows access to a device's statistics. SNMP managers

send a community string along with each SNMP request. If the community

string is correct, the BCM 5.0 responds with the requested information. If the

community string is incorrect, the BCM 5.0 discards the request and does not

respond. Community strings are used for SNMP v1 and v2C only.

Procedure steps

Step Action

1 Select Configuration > Administrator Access > SNMP.

2 Select the Community Strings tab.

3 Click Add. The Add Community String dialog box appears.

4 Configure the Add Community String attributes.

5 Click OK.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 223 224

No comments

Avaya Business Communications Manager 5.0 - Configuration - System User Manual Page 57