Avaya Business Communications Manager 5.0 - Configuration - System User Manual Page 93

  • Download
  • Add to my manuals
  • Print
  • Page
    / 224
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 92
Dial-up resources configuration 93
Nortel Business Communications Manager 5.0
Configuration — System
NN40170-501 02.04 Standard
September 2009
Copyright © 2009, Nortel Networks
1 Click Configuration > Resources > Dial Up Interfaces.
2 On the Dial-out Interfaces tab, select the ISDN interface.
3 On the Channel Characteristics tab, enter the Dial-out number for the
ISDN interface.
4 On the Dial-out Interface tab, select the Enable check box next to the ISDN
interface to enable.
Attention: BCM 5.0 only allows the configuration of two ISDN auto-dialout
interfaces. When both of these interfaces are enabled ISDN dial-in is disabled.
--End--
Disabling an ISDN interface
Use the following procedure to disable and ISDN interface.
Procedure steps
Step Action
1
Click Configuration > Resources > Dial Up Interfaces.
2 On the Dial-out Interface tab, clear the Enable check box next to the
interface.
--End--
Deleting an ISDN interface
Use the following procedure to delete an ISDN interface.
Procedure steps
Step Action
1 Click
Configuration > Resources > Dial Up Interfaces > Dial-out
interfaces tab.
2 Clear the Enable check box.
3 Click the ISDN interface you want to delete.
4 Click Delete.
A confirmation dialog box appears.
5 Click Yes.
The interface is deleted.
Page view 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 223 224

Comments to this Manuals

No comments