Avaya Business Communications Manager 5.0 - Configuration - System User Manual download pdf (Page 39)

Nortel Business Communications Manager 5.0

Configuration — System

NN40170-501 02.04 Standard

September 2009

BCM 5.0 configuration with Telset

Administration

The information in this chapter applies to both the BCM50 and the BCM450

platforms running BCM 5.0.

You can use Telset Administration through a digital telephone with a two-line

display to set the BCM 5.0 configuration parameters.

You cannot set all the basic parameters using Telset Administration. For

example, you cannot enter a keycode using the Telset Administration

interface. You must enter the keycodes using the Business Element Manager

interface or the USB interface. For more information and procedures on how

to download and apply keycodes on your BCM 5.0 system, see the Keycode

Installation Guide.

Prerequisites to BCM 5.0 configuration with Telset Administration

• Connect a digital telephone with a two-line display to your BCM system.

• For information about using Telset Administration to set parameters, see

the Telset Administration Guide (NN40170-604).

BCM450 configuration with Telset Administration procedures

This task flow shows you the sequence of procedures you perform to

configure the initial parameters of your BCM system through Telset

Administration. To link to any procedure, go to BCM 5.0 configuration with

Telset Administration navigation (page 40).

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 223 224

No comments

Avaya Business Communications Manager 5.0 - Configuration - System User Manual Page 39