Avaya P332G-ML User Manual download pdf (Page 118)

Chapter 12 Avaya P330 Layer 3 Features

104 Avaya P332G-ML User’s Guide

The DHCP/BOOTP server uses the relayed network information to decide from

which subnet the address should be allocated. Therefore, the DHCP/BOOTP server

must be configured to allocate addresses from the relayed networks configured on

the P330.

DHCP/BOOTP Relay in P330 is configurable per VLAN and allows you to specify

two DHCP/BOOTP servers. In this case, it duplicates each request, and sends it to

both servers. This provides redundancy and prevents the failure of a single server

from blocking hosts from loading.

You can enable or disable or DHCP/BOOTP Relay in P330.

BOOTP/DHCP CLI Commands

In order to... Use the following command...

Enable or disable relaying of bootp

and dhcp requests to the BOOTP/

DHCP server

[no] ip bootp-dhcp relay (no -

restores default)

Add or remove a BOOTP/DHCP

server to handle BOOTP/DHCP

requests received by this interface

[no] ip bootp-dhcp server (no -

restores default)

Select the networks from which the

bootp/dhcp server shall allocate an

address

[no] ip bootp-dhcp network (no -

restores default)

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 149 150

No comments

Avaya P332G-ML User Manual Page 118