Avaya P332G-ML User Manual download pdf (Page 43)

Chapter 6 Avaya P332G-ML Front and Rear Panels

Avaya P332G-ML User’s Guide 29

Note: All LEDs are lit during reset.

FC Flow Control

OFF – No flow control.

ON – One of the three possible flow control

modes is enabled.

Note: FC LED for Gigabit Ethernet ports

reflect the last negotiated mode when

autonegotiation is enabled and the link is

down.

Hspd High Speed Always ON – 1000 Mpbs mode only

LAG

Link Aggregation

Group (Trunking)

OFF – No LAG defined for this port

ON – Port belongs to a LAG

Table 6.2 Avaya P332G-ML <- -> Select buttons

Description Function

Left/Right Individual – select LED function (see table above)

Reset module Press both right and left buttons together for approximately 2

seconds. All LEDs on module light up until buttons are

released.

Reset stack Press both Right and Left buttons together for 4 seconds. All

LEDs on stack light up until buttons are released.

Table 6.1 Avaya P332G-ML LED Descriptions (Continued)

LED Name Description LED Status

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 149 150

No comments

Avaya P332G-ML User Manual Page 43