Avaya P332G-ML User Manual download pdf (Page 59)

Avaya P332G-ML User’s Guide 45

Chapter 9

Default Settings of the P330

This section describes the procedures for the first-time configuration of the Avaya

P330. The factory defaults are set out in detail in the tables included in this chapter.

Configuring the Switch

The Avaya P330 may be configured using the text-based Command Line Interface

(CLI), the built-in Avaya P330 Device Manager (Embedded Web) or Avaya Multi-

Service Network Manager™.

For instructions on the text-based CLI, see the Avaya P330 Reference Guide.

For instructions on installation of the graphical user interfaces, see Embedded Web

Manager. For instructions on the use of the graphical user interfaces, refer to the

Device Manager User’s Guide on the Documentation and Utilities CD.

Avaya P330 Default Settings

The default settings for the Avaya P330 switch and its ports are determined by the

Avaya P330 software. These default settings are subject to change in newer versions

of the Avaya P330 software. See the Release Notes for the most up-to-date settings.

Table 9.1 Default Switch Settings

Function Default Setting

IP address 149.49.32.134

Subnet Mask 255.255.255.0

Default gateway 0.0.0.0

Management VLAN ID 1

Spanning tree Enabled

Bridge priority for Spanning Tree 32768

Keep alive frame transmission Enabled

Network time acquisition Enabled, Time

protocol

Time server IP address 0.0.0.0

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 149 150

No comments

Avaya P332G-ML User Manual Page 59