Avaya P332G-ML User Manual download pdf (Page 31)

Avaya P332G-ML User’s Guide 17

Chapter 4

Installation

The P332G-ML is ready to work after you complete the installation instructions

below.

Required Tools

Make sure you have the following tools at hand before undertaking the Installation

procedures:

• Philips (cross-blade) screwdriver

Site Preparation

Avaya P330 can be mounted alone or in a stack in a standard 19-inch equipment

rack in a wiring closet or equipment room. Up to 10 units can be stacked in this way.

When deciding where to position the unit, ensure that:

• It is accessible and cables can be connected easily and according to the

configuration rule.

• Cabling is away from sources of electrical noise such as radio transmitters,

broadcast amplifiers, power lines and fluorescent lighting fixtures.

• Water or moisture cannot enter the case of the unit.

• There is a free flow of air around the unit and that the vents in the sides of the

case are not blocked.

Note: Use Octaplane cables to interconnect with other switches.

• The environmental conditions match the requirements listed below:

Table 4.1 Environmental Prerequisites

Operating Temp. -5 to 50°C (23 to 122°F)

Relative Humidity 5% to 95% non-condensing

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 149 150

No comments

Avaya P332G-ML User Manual Page 31