Avaya B5800 User Manual download pdf (Page 47)

Environmental requirements

The planned location must meet the following requirements. If being installed into a rack

system, these are requirements for within the rack:

• Temperature: 0°C to 40°C / 32°F to 104°F.

• Humidity: 10% to 95% non-condensing.

• Check there are no flammable materials in the area.

• Check there is no possibility of flooding.

• Check that no other machinery or equipment needs to be moved first.

• Check that it is not an excessively dusty atmosphere.

• Check that the area is unlikely to suffer rapid changes in temperature and humidity.

• Check for the proximity of strong magnetic fields, sources of radio frequency and other

electrical interference.

• Check there are no corrosive chemicals or gasses.

• Check there is no excessive vibration or potential of excessive vibration, especially of any

mounting surface.

• Check that where telephones are installed in another building, that the appropriate

protectors and protective grounds are fitted (see

Out of Building Telephone Installation on

page 72).

• Check there is suitable lighting for installation, system programming and future

maintenance.

• Check that there is sufficient working space for installation and future maintenance.

• Ensure that likely activities near the system will not cause any problems, e.g. access to

and maintenance of any other equipment in the area.

• Where ventilation holes are present on any of the B5800 Branch Gateway units, those

holes should not be covered or blocked.

• The surface must be flat horizontal for free-standing or rack mounted installations.

Wall mounting: In additional to the requirements above, the following are applicable to control

units that are mounted on the wall.

• Units must only be mounted onto permanent wall surfaces.

• The surface must be vertical and flat.

• Orientation of the unit must be as shown in the section on

IP500 Wall Mounting on

page 65.

• The appropriate Avaya wall mounting kits must be used.

Environmental requirements

Implementing the Avaya B5800 Branch Gateway for an Avaya Aura

Configuration October 2012 47

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 313 314

No comments

Avaya B5800 User Manual Page 47