Avaya P332G-ML User Manual download pdf (Page 141)

Avaya P332G-ML User’s Guide 127

Chapter 14

Troubleshooting the Installation

This section will allow you to perform basic troubleshooting of the installation. If

you are unable to solve the problem after following the procedures in this chapter,

please contact Avaya Technical Support. Refer to “How to Contact Us“for full

details.

Table 14.1 Troubleshooting

Problem/Cause Suggested Solution

Switch does not power up

• AC power cord not inserted

or faulty

• Check that the AC power cord is

inserted correctly

• Replace the power cord

If the cord is inserted correctly, check that the AC power source is working by

connecting a different device in place of the P3330.

• If that device works, refer to the next step.

• If that device does not work, check the AC power

• P3330 AC power supply not

functioning

• Use an optional BUPS (Backup Power

Supply)

• Contact your local Avaya distributor. The

power supply is not user-replaceable.

Stacking not functioning

• X330-STK modules not

inserted correctly

(LEDs on stacking module

do not light)

• Check that modules are installed

correctly

• Octaplane™ cables not

installed correctly

(LEDs on stacking module

do not light)

• Check that the cables are inserted

correctly

• Check that there are no cross-corrections

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 149 150

No comments

Avaya P332G-ML User Manual Page 141