Avaya IP Line User Manual download pdf (Page 119)

100

101

Features Page 119 of 770

IP Line Description, Installation, and Operation

Shared Zone

The current default zone type is a Shared Zone. IP Phones configured in

Shared Zones use DSP resources configured in shared zones. If all the Shared

Zones’ gateway channels are used, the caller receives an overflow tone and

the call is blocked.

Select gateway channels in the following order:

• Select a channel from the same zone as the zone where the IP Phone is

configured.

• Select any available channel from the Shared Zones’ channels.

Private Zone

The Private Zone enables DSP channels configured in a Private Zone to be

used only by the IP Phones that have also been configured for that Private

Zone. If more DSP resources are required by these IP Phones than what are

available in the zone, DSPs from other Shared Zones are used.

IP Phones configured in Shared Zones cannot use the Private Zones’

channels.

Select the gateway channels in the following order:

• Select a channel from the same Private Zone as the zone where the IP

Phone is configured.

• Select any available channel from the pool of Shared Zones’ channels.

LD 117

VGW channels and IP Phones are set as shared or private based on zone

configuration. In LD 117, zone configuration can be set to either shared or

private using the parameter <zoneResourceType>.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 771 772

Comments to this Manuals

No comments

Avaya IP Line User Manual Page 119

Comments to this Manuals

Related products and manuals for IP communication servers Avaya IP Line