Avaya IP Line User Manual download pdf (Page 639)

100

101

Voice Gateway Media Card maintenance Page 639 of 770

IP Line Description, Installation, and Operation

Procedure 99

Upgrading the ITG-P 24-port 8051

XAController firmware

1 Check if the 8051 XAController firmware upgrade is required. Check the

firmware version by entering the firmwareVersionShow command:

IPL> firmwareVersionShow

Firmware Version = ITG Firmware Rls 4.0

value = 40 = 0x28 = '('

IPL>

Note: If the F/W version is version 5.7, vintages earlier than NTVQ01AB

do not require the upgrade. There is no need to download the Version 8.0

software for the Voice Gateway Media Card NTVQ01AB as the software

is pre-loaded at the factory.

2 Depending on the location of the firmware file, enter one of the following

commands as shown in Table 91:

The file name for the 8051 XAController firmware for the ITG-P 24-port

line card is ITGPFW57.BIN

Table 91

Upgrade command based on file location

— File is located on the card's /C: drive (The file was previously FTP’d to /C:):

upgradeXa “127.0.0.1","userid”,"password”,"</C:/path>”,"<fw_filename>”

— File is located on a PC Card plugged in the card’s faceplate:

upgradeXa “127.0.0.1”,"userid”,"password”,"</A:/path>”,"<fw_filename>”

— File is located on another card’s /C: drive (The file was previously FTPed to /C:):

upgradeXa “<ITG ELAN IPaddr>”,"userid”,"password”,"<path>”,"<fwfilename>”

— File is located on the OTM PC:

upgradeXa “<PC’s IP addr>”,"itguser”,"itguser”,"“,”<fw_filename>”

— File is located on a network FTP server:

upgradeXa "<server’s IP addr>","<uid>","<pswd>","<path>","<fw_filename>"

1 2 ... 634 635 636 637 638 639 640 641 642 643 644 ... 771 772

Comments to this Manuals

No comments

Avaya IP Line User Manual Page 639

Comments to this Manuals

Related products and manuals for IP communication servers Avaya IP Line