Page 78 of 770 Features
553-3001-365 Standard 3.00 September 2004
Figure 7
isetNATShow sample output
The command “isetShow” and “isetNATShow” can display the information
about an IP Phone based on IP or TN. The “IP” is the Public IP address used
for signaling. If “isetShow” or “isetNATShow” is typed with a Public IP
address used by multiple IP Phones, then all those IP Phones are displayed,
even if the IP Phones are registered to different cards. Therefore, the
“isetShow” and “isetNATShow” now display the information similar to the
following example:
Signaling....
Public...
(Private...
----
->Found on Card TN 009-00, ELAN IP....
47.11.217.102....
PL> isetNATShow "47.11.217.102"
alue = 0 = 0x0
PL>
ignalling Media
ublic IP Addr:Port Public IP Addr:Port
Private IP Addr:Port) (Private IP Addr:Port) NAT Type RTCP Type Set-TN Regd-TN
--------------------------- ---------------------------- --------- ---- ------------ ------------- ---------
>Found on Card TN 009-00 , ELAN IP 47.11.217.21, TLAN IP 47.11.216.185 :
7.11.217.102:10000 47.11.217.102:10354 Cone Y i2002 Ph2 061-08 061-08
192.168.1.3:5000) (192.168.1.3:5200)
>Found on Card TN 009-00 , ELAN IP 47.11.217.21, TLAN IP 47.11.216.185 :
7.11.217.102:10006 47.11.217.102:10007 Cone Y i2004 061-00 061-00
192.168.1.4:5000) (192.168.1.4:5200)
Comments to this Manuals