IP Line 4.0 administration Page 421 of 770
IP Line Description, Installation, and Operation
• The Level 1 Password (PWD1) is set at the Call Server and is sent to all
cards in the node.
• The IP Phone Installer Password is first applied to one card in the node,
and then is applied to all the cards in the node.
SNMP community names strings
SNMP community names strings are required to access the Voice Gateway
Media Card. There are three community names: public, admingroup2, and
admingroup3.
OTM 2.2 stores the community names for Meridian 1 systems. See Figure 71
on page 285. Procedure 27 on page 285 explains how to change the SNMP
community names to control access to the IP Telephony node.
Element Manager stores the community names for CS 1000 systems. See
Figure 98 on page 348. Procedure 43 on page 348 is used to change the
SNMP community name to control access to the IP Telephony node.
IPL> CLI Shell user name and password
The IPL> Command Line Interface (CLI) is password-protected to control
Telnet access and access to the local maintenance port. The same user name
and password also controls FTP access to the Voice Gateway Media Cards.
Login banner
The IP Line 4.0 login banner information includes the IP 4.0 line card
software version, ELAN IP address, card type, firmware version, current time
and date, system name, system location, and system contact.
Comments to this Manuals