Avaya IP Line User Manual Page 649

  • Download
  • Add to my manuals
  • Print
  • Page
    / 772
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 648
Voice Gateway Media Card maintenance using OTM 2.2 Page 649 of 770
IP Line Description, Installation, and Operation
Replace a Leader Voice Gateway Media Card
To replace a Leader Voice Gateway Media Card, follow the steps in
Procedure 102.
Procedure 102
Replacing a Leader Voice Gateway Media Card
1 Locate the faulty card in the OTM IP Telephony database by the TN, MAC
address, and IP address.
2 Disable the faulty Voice Gateway Media Card in LD 32 with the DISI
command. The system displays “NPR0011” when the card has been
completely disabled by the DISI command.
3 Use the disiTPS command at the IPL> CLI to disable the LTPS on the
faulty Voice Gateway Media Card.
Note: This forces all Internet Telephones registered on this card to
re-register. If there are sufficient resources, this can take up to several
minutes. If there are not sufficient resources, Internet Telephones can
remain unregistered indefinitely.
4 Use the isetShow command to monitor the status of the card and the
reregistration of the IP Phone. The Voice Gateway Media Card card is
completely disabled when no IP Phones are registered on the card.
5 Remove the faulty Voice Gateway Media Card from the system.
6 Install the replacement Voice Gateway Media Card into the card slots in
the Meridian 1/ CS 1000M IPE module, Option 11C/CS 1000M Cabinet,
or CS 1000 Media Gateway 1000S/Media Gateway 1000S Expander. To
do this:
a. Pull the top and bottom locking devices away from the card faceplate.
b. Insert the Voice Gateway Media Card into the card guides and gently
push it until it makes contact with the backplane connector. Hook the
locking devices.
CAUTION
This procedure is not supported for a node that resides
on a CS 1000 system.
Page view 648
1 2 ... 644 645 646 647 648 649 650 651 652 653 654 ... 771 772

Comments to this Manuals

No comments