Avaya BCM50 Installation Manual download pdf (Page 187)

Chapter 22 Replacing a media bay module 187

BCM50 Installation and Maintenance Guide

To insert the new MBM

1 Unpack the new MBM.

2 Verify that all dip switches are in the factory default positions. See Verifying the media bay

module switch settings on page 98.

3 Install the MBM. See Installing a media bay module in an expansion unit on page 102.

4 If the new MBM is a different type of module (for example, you replaced a DSM16 with a

4x16), use Element Manager to configure the new MBM before continuing. For more

information about configuring the MBM, see the procedure To configure the MBM(s) on page

158.

5 Reconnect the power supply cable. See the procedure To connect a power supply without a

UPS on page 109.

6 Connect the telephone line and extension cables to the port on the front of the new MBM. See

Connecting the lines and extensions on page 110.

If the new MBM is a different type of module (for example, you replaced a DSM16 with a

4x16), you must make any additional connections to the MBM before continuing.

7 Proceed to the procedure To test the MBM on page 169.

8 Continue with the procedure To return the system to operation on page 176.

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 294 295

No comments

Avaya BCM50 Installation Manual Page 187