Avaya BCM50 User Manual download pdf (Page 28)

BCM50 System Start Up

28 NN40010-318 Issue 1.2 BCM50 Rls 6.0

11. DNS settings can also be entered, if you are not receiving this

information via DHCP. In the IP Subsystem area, click on the General

Settings tab, and enter the relevant DNS information in the DNS

Settings fields.

Configuring DHCP

The BCM can be used as the main DHCP server for the network, or it can be

used to provide DHCP information to IP Sets only. Alternatively, DHCP can be

disabled on the BCM if DHCP requirements are being provided by another

device on the network.

Note: The settings detailed in this section do not relate to DHCP on the

BCM50(b)e routers. For information on the BCM50(b)e DHCP settings, refer

to the BCM50 Router LAN Settings Guide.

Note: On the BCM50(b)e models, it is possible to choose between using the

DHCP service on the main DHCP unit, or the DHCP service on the router. If

the router card DHCP service is used, the main module DHCP service is

automatically disabled.

Note: For full instructions on configuring DHCP on the standard BCM50

model, or if using the core DHCP service on the main module rather than the

BCM50(b)e router, refer to the DHCP Guide.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 81 82

No comments

Avaya BCM50 User Manual Page 28