BCM50 System Start Up
66 NN40010-318 Issue 1.2 BCM50 Rls 6.0
3. Select IP Sets from the Configured Device column. The Details for
Module displays in the lower pane with the IP Terminal Global
Settings tab as the default.
4. Configure the IP Terminal Global Settings attributes.
5. Now register the IP Phones.
IP Sets – IP Terminal Global Settings
Set this value to ON to allow new IP clients to register with
the system.
WARNING: Remember to set Registration to Off when you
have finished registering the new telephones.
Enable global
registration
password
If you want to require the installer to enter a password when
IP telephones are configured and registered to the system,
check this box. If this option is not selected, a user ID
(738662) and password (266344) is requested during IP Set
registration.
If the Enable Global Registration Password checkbox is
selected, enter the password the installer will enter on the IP
telephone to connect to the system.
If set to ON, the system assigns an available DN as an IP
terminal requests registration. It does not prompt the installer
to enter a set DN.
Any information in this field appears on the display of all IP
telephones. For example, your company name or slogan.
For all other settings, please refer to the IP Telephony Guide.
Comments to this Manuals