Avaya BCM50 User Manual download pdf (Page 56)

BCM50 System Start Up

56 NN40010-318 Issue 1.2 BCM50 Rls 6.0

Attribute

Value

Description

Attribute

Value

Description

Clock

source

Primary

External

Secondary

External

Internal

Primary External - uses clock from PSTN

Secondary External - used if system has more than one Loop

Internal - uses clock on BCM

Overlap:

receiving

Supports target lines in markets which use Overlap receiving signaling on

the BRI trunks. Overlap receiving must be configured for each BRI loop.

Overlap:

length

0-10

Set the local number length for loops to interfaces that receive overlap

rather than enbloc digits. This number is the total length of the called party

number received. This number is used to calculate the number of leading

digits that need to be removed by the system.

Note: This parameter appears only when Overlap receiving is enabled.

Example:

Public received number = 4502303

Target line received numbers = 303

Local number length = 7

Public received number length = 3

Thus the first four digits are deleted by the system.

Send Name

Display

(ETSI QSIG

only)

If the switch allows outgoing name display, select the check box.

CTM/GATM (4 and 8 port) Module

1. Double click in the Configured Device field and set it to either

CTM8/GATM8 or CTM4/GATM4 depending on which module is

required.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 81 82

Comments to this Manuals

No comments

Avaya BCM50 User Manual Page 56

Comments to this Manuals

Related products and manuals for Routers Avaya BCM50