Avaya BCM50 User Manual download pdf (Page 41)

BCM50 System Start Up

NN40010-318 Issue 1.2 BCM50 Rls 6.0 41

should be no Secondary reference defined on any DTM/BRI. Note that

there should only be one defined Secondary clock source on a system.

 Internal: The DTM/BRI does not obtain timing from the network, but

transmits the internally-generated system timing, from the

Primary/Secondary source, to equipment to which it is connected. Note

that while in the absence of a DTM Primary clocking source a BRI

module can be used for the primary timing reference, it is always

recommended that, when possible, DTM(s) be used as primary (and

secondary) clock sources and that any remaining DTMs/BRIs be set to

Timing Master.

3. The module type has been set. Any module specific settings will be

displayed in the lower window. Note that Line numbers will be

displayed in the Low and High fields for the module.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 81 82

No comments

Avaya BCM50 User Manual Page 41