Avaya P580 User Manual download pdf (Page 171)

100

101

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 4-41

Using VLANs, Spanning Tree, Hunt Groups, and VTP Snooping

7. Repeat steps 1 through 10 on the switch at the other end of the

hunt group connection.

8. Select Configuration from the Modules & Ports folder on

the Web Agent window. The Module Information window

re-opens (see Figure 4-20).

9. Select a port number from the Ports column. The Physical

Port Configuration window opens (see Figure 4-21).

10. Select a checkbox from the Enable column for that port. The

group can now function as a load-sharing connection.

11. Click APPLY to save your changes, or CANCEL to restore

previous settings.

* Note: If thousands of addresses have been learned on a port

and a link in the hunt group goes down, the switch-over

of traffic between ports may take several seconds.

* Note: If you use static VLAN binding and hunt groups, make

sure to first bind all the VLANs to all the ports that you

will use in the hunt group and then apply the hunt

group to those ports.

Creating Hunt

Groups Using

the CLI

To create a hunt group using the CLI, enter the following command

from Configure mode:

<configure># set huntgroup <huntgroup-name>

Refer to the Command Reference Guide for the Avaya P550R, P580, P880,

and P882 Multiservice Switches, Version 5.3 for details about this

command.

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 759 760

Comments to this Manuals

No comments

Avaya P580 User Manual Page 171

Comments to this Manuals

Related products and manuals for Computer Accessories Avaya P580