Avaya P580 User Manual download pdf (Page 225)

100

101

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 5-45

Configuring Port Parameters

Enabling IEDR

* Note: To enable IEDR for ports in a hunt group, you must use

a different command that enables the feature globally for

all ports in all hunt groups on the switch. For

information on this command, see "Enabling IEDR for

Hunt Groups" on page 5-45.

* Note: (SPR 5938) Do not use ISL Tagging (Trunk Mode:

Multilayer) on ports that have IEDR enabled.

IEDR is disabled by default on gigabit ports. To enable the feature:

1. Enter Global Configuration mode.

The CLI displays the <configure># prompt.

* Note: For information on how to enter this mode, see

“Accessing/Exiting the Command Modes” in

Chapter 1, “Overview,” of Cajun P550R/P880/

P882 Command Line Interface Reference Guide.

2. Enter the following command:

set port internal-error-shutdown {<slot>/<port> |

<slot> | all-ports} enable

To disable IEDR, enter:

set port internal-error-shutdown {<slot>/<port> | <slot> |

all-ports} disable

Enabling IEDR for Hunt Groups

This procedure globally enables IEDR for all ports in all hunt groups

on the switch.

* Note: (SPR 5909) All ports that are enabled for IEDR will be

subjected to the hunt group IEDR setting if they are

placed in a hunt group whether they are

administratively disabled or enabled. Ports that are

enabled for IEDR before being placed in a hunt group

will still display when showing configuration but they

still will be subjected to take on the hunt group setting

until they are removed from the hunt group.

To globally enable IEDR for all ports in hunt groups:

1 2 ... 220 221 222 223 224 225 226 227 228 229 230 ... 759 760

Comments to this Manuals

No comments

Avaya P580 User Manual Page 225

Comments to this Manuals

Related products and manuals for Computer Accessories Avaya P580