Avaya P580 User Manual download pdf (Page 425)

100

101

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1 11-7

Configuring the OSPF Routing Protocol

Creating OSPF

Areas Using the

CLI

To create OSPF areas using the CLI, enter the following command in

Enable/Configure mode:

> (configure router ospf)# area <area-id> <option>

Refer to the Command Reference Guide for the Avaya P550R, P580, P880,

and P882 Multiservice Switches, v5.3 for details about this command.

* Note: If you use the network area CLI command to add an

interface to an OSPF area, be careful not to enter the IP

mask for the <wildcard-mask> variable. The

<wildcard-mask> variable is the inverse of a network

mask. Enter a 32-bit number in four-part, dotted

decimal format. Place ones in the bit positions that you

want to mask.

For example, to enable OSPF on interface 10.10.10.1

(where the network mask is 255.255.255.0) and assign it

to area 2.2.2.2, enter:

network 10.10.10.1 0.0.0.255 area 2.2.2.2

If you enter the IP network mask (255.255.255.0)

instead of the wildcard mask (0.0.0.255), all OSPF

interfaces that have 1 for the last octet of their IP address

will be added to area 2.2.2.2.

Deleting OSPF Areas

You can delete an OSPF area using either the Web Agent or the CLI.

Using the Web

Agent

To delete an OSPF area using the Web Agent:

* Note: Before deleting an OSPF area, assign any interfaces that

are associated with the area to a different area or delete

the interfaces.

1. Select Areas from the Routing > IP > OSPF group on the

Web Agent window. The OSPF Area dialog box opens

(Figure 6-79).

2. Select the OSPF Area to be removed from the Select field.

3. Click DELETE. The OSPF area you selected is deleted.

1 2 ... 420 421 422 423 424 425 426 427 428 429 430 ... 759 760

Comments to this Manuals

No comments

Avaya P580 User Manual Page 425

Comments to this Manuals

Related products and manuals for Computer Accessories Avaya P580