Avaya P580 User Manual download pdf (Page 671)

100

101

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 -25

80-Series QoS

use-l2 Classifies traffic by the layer 2 priority of

the packet. If you enter use-l2, the

switch ignores the ACL rule priority and

DiffServ priority.

deny Blocks the packet.

fwd1 | fwd2 | fwd3 | fwd4 |

fwd5 | fwd6 | fwd7 | fwd8

The priority that you want to set.

The number following the fwd specifies

the priority. The fwdx

arguments are 1-

based, while the queue priorities are 0-

based. Consequently, the 1-based

priorities are converted to 0-based

priorities by the QoS features. For

example, to specify a priority of 0, enter

fwd1.

These keywords are retained from earlier

versions of software for backward

compatibility. The use-priority

<priority> keyword and argument serve

the same function.

<protocol-id> The ID of the protocol that you want to

assign a priority to. RFC791 defines the

protocol IDs.

<source-ip-addr> The source IP address of the subnet that

you want to assign a priority to.

<source-wildcard> The inverse of a network mask. Enter a

32-bit number in four-part, dotted

decimal format. Place ones in the bit

positions that you want to mask.

This parameter specifies a range of IP

address. For example, to specify all IP

addresses in the 10.10.70 subnet, enter

10.10.70.0 0.0.0.255.

any A source of 0.0.0.0 and a source-wildcard

of 255.255.255.255

host <source-ip-addr> The source IP address that you want to

assign a priority to.

Table 6-150. Keywords, Arguments, and Options

Keyword, Argument

or Option

Definition

2 of 3

1 2 ... 666 667 668 669 670 671 672 673 674 675 676 ... 759 760

Comments to this Manuals

No comments

Avaya P580 User Manual Page 671

Comments to this Manuals

Related products and manuals for Computer Accessories Avaya P580