Avaya BCM50 User Manual download pdf (Page 12)

BCM50 System Start Up

12 NN40010-318 Issue 1.2 BCM50 Rls 6.0

Physical Connection to the BCM

The BCM50 OAM port can accommodate either a patch cable or a cross-over

cable.

One end of the cable is connected to the PC network card, the other end to

the OAM port of the BCM.

Testing the IP connection using Ping

When a physical connection has been made, you should next test the

connection by “pinging” the BCM. This test is performed on the Laptop/PC

that is connected to the BCM.

1. Go to the Start button on your Windows desktop, and select Run.

2. Type command and press OK. This will bring up the MS-DOS /

command prompt.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 81 82

No comments

Avaya BCM50 User Manual Page 12