Avaya BCM50 User Manual download pdf (Page 67)

BCM50 System Start Up

NN40010-318 Issue 1.2 BCM50 Rls 6.0 67

Additional Information

Startup Profile Configuration Tool

It is possible to apply Intial settings such as BCM Name, Region, IP Settings,

Start DN, and a Keycode File via a Startup Profile Configuration tool. The

Startup Profile Configuration tool is an alternative method of configuring BCM

initial settings to the previous sections in this guide.

The Startup Profile is configured via an Excel spreadsheet, saved to a USB

stick which is then inserted into the BCM USB port. The BCM is then powered

up whereby the Startup Profile is read and the settings applied

Note: The Startup Profile cannot be run after the Keycodes have been

applied. When the Startup Profile is successfully applied, the BCM system

automatically reboots to complete the system configuration. The Startup

Profile is not fully loaded until the system reboots.

Note: The USB storage device must be formatted for the FAT32 file system. If

necessary, reformat the USB storage device by plugging it into the USB port

of your computer, right-clicking the USB device icon, and selecting FAT32

reformatting. Warning: This destroys any data you had on the USB.

Before Configuring the Startup Profile Configuration Tool

The Startup Profile is configured via an Excel spreadsheet. In order to

configure and save the Startup Profile, the Excel macros need to be disabled.

To set the Excel Macro security settings:

1. With Excel open, go to the Tools menu and select Options.

2. Select the Security tab.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 81 82

No comments

Avaya BCM50 User Manual Page 67