Site Manager Parameters
314470-15.2 Rev 00
A-11
RADIUS Client Parameters
You use the following parameters to configure a RADIUS client. This section
replaces “Client IP Address Parameter” in Appendix A of Configuring RADIUS.
Parameter: Authentication
Path: Protocols > Global Protocols > RADIUS > Create RADIUS > Add
or
Protocols > Global Protocols > RADIUS > Edit RADIUS
Default: Disable
Options: Enable
|
Disable
Function: Enables or disables the RADIUS client on the gateway.
Instructions: Set to Enable to activate the RADIUS client on the router. Accept the default
value, Disable, to deactivate RADIUS authentication.
MIB Object ID: 1.3.6.1.4.1.18.3.5.22.1.1.2
Parameter: Accounting
Path: Protocols > Global Protocols > RADIUS > Create RADIUS > Add
or
Protocols > Global Protocols > RADIUS > Edit RADIUS
Default: Disable
Options: Enable
|
Disable
Function: Enables or disables RADIUS accounting.
Instructions: Set to Enable to activate RADIUS accounting. Accept the default value,
Disable, to deactivate RADIUS accounting.
MIB Object ID: 1.3.6.1.4.1.18.3.5.22.1.1.3
Comments to this Manuals