Avaya 3100 Mobile Communicator and Security User Manual download pdf (Page 47)

The Status field indicates which server is currently active. In a single-server system,

this is always the local server.

2. To stop the server processes, click Gateway Actions beside the server to be

stopped and select Stop.

3. To start the server processes, click Gateway Actions beside the server to be started

and select Start.

4. To restart the server processes, click Gateway Actions beside the server to be

restarted and select Restart.

Procedure job aid

The following table provides field descriptions for the status of the Gateway Server.

Field Description

Running The server is running. In redundant configuration, the server is

the active server.

Connecting The server is trying to connect to the Avaya 3100 Mobile

Communicator server.

Network Error Connectivity to the server has been lost.

Stopped The server is stopped.

Running-Standby The server is in standby mode in a redundant configuration.

Managing the server processes from the command line

Instead of using the Web Administration Console, you can use the Linux command line to

check, start, stop, and restart server processes.

Prerequisites

You must be logged into the server as superuser. For more information, see

Accessing the

server command line as superuser on page 115.

1. To check the server processes, enter

appstart status

Procedure job aid

Administration and Security October 2010 47

1 ... 46 47 48 ... 116

No comments

Avaya 3100 Mobile Communicator and Security User Manual Page 47